|
|
|
|
|
| |
|
| Main characteristic
|
|
Fire prevention and stop burning
Measure through national authoritative organization, Mag
Boardis the A grade not-burning material, The wall and steel
construction which are comprised by this materials, their
Fire-resistant limit is far higher than the national standard
to protect.
Bear water and damp proof
Through being proved, Mag Boardstill keeps intact after
being soaked in water for one month, the phenomenon of swelling
and out of shape will not happen. Out of shape rate in the
condition of wet or dry is 0.26%, and absorb water rate is
about 15%. Especially roll over intensity in the condition
of dry is18Mpa, in the condition of picking up the moisture
is 22Mpa, pick up the moisture intensity of state higher to
resist.
Sound insulation
95mm insulate against sound wall can up to four 12mm gypsum
boards and 123mm wall ‘s sound insulation standard, equivalent
to 150mm ordinary solid sound insulation result of brick wall.
Keep warm and insulate heat
Mag Board’s thermal resistance is 1.14m2.k/w; it has the
function of fine heat insulation and keeping performance warm
extremely.
The light quality and high intensity
10mm thick panel weight have 10.07kg/m2, it is 31.5kg/m2after
making the wall with the light steel fossil fragments and
is about 1/10 to the ordinary solid clay brick wall, its assault
intensity is 2-3 times to wall of ordinary gypsum board, it
is convenient to install, and can shorten time limit for a
project effectively.
Green environmental protection
This material is formed for natural materials, such as the
inorganic matter, plant fiber, etc., radioactivity is well
below the National standard, environmental protection accord
with national request, and it is new product encouraged by
state policies.
|
The similar material characteristic
comparing |
| Gypsum board |
Fiber cement board (the board of solicic
acid calcium) |
Mag Boards |
| The thickness reaches
above 12mm can reach the request of a grade and the material
that is not fired. |
The thickness reaches
above 6mm can reach the request of a grade and the material
that is not fired. |
3MM thickness reaches
to the request of firing prevention |
| Its hydroscopic is
heavy; it is apt to out of shape. |
Expansion of coefficient
is About 8/10000; absorbing water rate of is slightly
high (absorbing water rate is 35%) |
Able to bear the tide
well, not out of shape, not against the tide. |
| The board is taken
as rigidity, it is unable to do the modeling crookedly. |
The board is taken
as rigidity, it is unable to do various types of modeling
crookedly. |
Can stick to, cut down,
nailing, gluing, paint, sawing, planning, and can use
the art designing to cut, it is extremely convenient to
construct. |
| The processing two
times is Difficult, superficial laminating is not good,
decorated layer is unable to paste. |
General construction
way only being taken, difficult to be constructed with
two times and be covered on the surface. |
The board body is pliable
and tough and flexible, can do various types of modeling
crookedly |
| Weight is heavy, it
is strenuous to carry, and the damaged rate is high. |
Weight is relatively
heavy, it is strenuous to carry, and the damaged rate
is high. |
Can collocate various
types of panel, makeup skin or log skin engaged in the
processing two times. |
| Intensity low, poor
to be able to bear Climate, afraid of being collided,
afraid of water, afraid of tide, and out of shape seriously
when being stained by water. |
Contain the asbestos
in most products. |
Light weight, conveniently
carry, low damaged rate, waterproof, damp proof. |
|
|
|
©2006
Dezhou Meide Construction Material CO.,Ltd.
Address: No.200,TianQu Road,Dezhou City ,Shandong province,China
Contact Person: Mr Edward
Tel. : 0086-534-2036620
Fax: 0086-534-2381056
Mobile: 0086-13869202056
MSN: edwardxhb@msn.com Email: edwardxhb@yahoo.com.cn |
|